CAS NO: | 17557-23-2 | MF: | C11H20O4 |
---|---|---|---|
Other Name: | Epoxy Glycidyl Ether | Grade Standard: | Industrial Standard |
Application: | Potting & Encapsulation, Electronics, Flooring, Adhesives | Appearance: | Clear Transparent Liquid |
High Light: | 39443 66 8,1954 28 5 |
Neopentyl Glycol Diglycidyl Ether XY678 Clear Transparent Liquid
Neopentyl Glycol Diglycidyl Ether
1. Description
Chemical name: Neopentyl glycol diglycidyl ether
Molecular formula: C11H20O4
CAS Number: 17557-23-2
Appearance: Colorless transparent liquid
Containing two epoxy groups which can take part in curing reaction of epoxy resin when curing, and form chain and net conformation, although the diluents effect of XY678 is as good as that of single glycidyl ether, the performance of its cured epoxy such as compressive strength, flexural strength, tensile strength, impact strength and adaptive time is better than that of single glycidyl ether.
2. Technical Data Sheet
Specifications |
Color APHA |
Viscosity, 25℃ mPas |
Epoxide equivalent g/eq |
Hydrolysable chloride % |
Inorganic chlorine ppm |
Moisture content % |
XY678 | ≤40 | 10~25 | 0.68~0.73 | ≤0.20 | ≤20 | ≤0.1 |
3. Application
-Good wet-keeping, low toxic. Used as fibrin treating agent to enhance its flexible, toughness, chromaticity, anti-alkalescence.
-Used as textile treating agent of cotton or hemp or silk to enhance its tensile strength.
-Used in diluents and tougheness improvement, winding-forming.
4. Packing
- Packed in 20 kg/barrel or 200 kg/barrel or 1000kgs/ IBC container
- Storage and transportation must conform to basic requirements of normal chemicals.
- Store in a cool, dry and well-ventilated area. Keep away from ignition sources, heat and flame and sunlight.
- It is necessary to maintain insulated (tightly seal) after use, in order to avoid negative influence arousing from moisture absorption.
5. Please note that all information provided by XYCC is considered accurate in certain condition. However we will not promise or bear any legal responsibility due to factors in producing and processing products. The customer should test applicability of our products fully before using it.